Problems updating and resetting

Forum to discuss the new Dual Core Rikomagic MK802 IIIS (bluetooth) Mini PC

Moderators: KEgg, twjordo, tatubias

Problems updating and resetting

Postby Marklund » Sun May 03, 2015 11:59 am

I currently have problems connecting ny unit to my Windows 8.1 computer.

I try to connect it accordingly to the instructions supplied here in the forum but after much work I can only get the updateprogram to recognize my unit as pink and when I push the switch-button the unit seems to reset and start up again but upon startup Windows only sees it as unrecognizable and it says that it failed to start up again with reference to "Code 43"

Can someone help me to figure out what to do to make it work or has my unit gone total FUBAR?
Marklund
 
Posts: 1
Joined: Fri May 01, 2015 9:03 pm

Re: Problems updating and resetting

Postby Eihtjay » Fri May 08, 2015 3:22 am

i had a few problem first time too, follow this thread.
viewtopic.php?f=11&t=3942
first option whit the SD did not work fore me (MK802IIIS 8B)
Second option worked after a few times.
the problem is windows cannot find the drivers for the device, so you must go to device manager.
mark the unidentified device and select update driver.
select "search for driver on this computer" and select the folder where the driver is.
(Note: the "driver" folder should be in the "rkbatchtool" folder), its in the guide ^^
(What i wrote is not a quide, this is a quik summary of the problem, to archieve your goal you need to read the guide above)
Eihtjay
 
Posts: 15
Joined: Sat Feb 07, 2015 10:20 am


Return to Rikomagic MK802 IIIS Forum

Who is online

Users browsing this forum: No registered users and 3 guests

cron