[ROM] CyanogenMod 11 MK902

Forum to discuss the quad core MK902 Android PC

Moderators: KEgg, twjordo, tatubias

[ROM] CyanogenMod 11 MK902

Postby abdul_pt » Sun Jul 12, 2015 6:15 pm

Image

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

Code: Select all
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.


CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.




First install

* Download and unzip the image file
* Open RK Batch tool and put the MK902 in bootloader
* Press upgrade button
* Enjoy


Download

* http://www.freak-tab.de/abdul_pt/nitro/CM11_MK902.zip



Read next posts for more
abdul_pt
 
Posts: 3
Joined: Sun Jul 12, 2015 6:08 pm

Re: [ROM] CyanogenMod 11 MK902

Postby abdul_pt » Tue Jul 14, 2015 11:09 am

I started to port CM, but for another box until i kill it. My mate Daemonium was kind enough to send me this box, so a huge thanks to him. Some things were already done. Some i had to redo from zero, i had to build a new rom, from RK SDK to grab new binaries and with it i had to redo the kernel. Some time was wasted in this, i hope you enjoy it.



Bugs :

* Camera preview is OK, when saving the photo it gets upside down
* You tell me





What's inside :

Version 1, image file from OP
* Unified Storage
* Minimal GAPPS preinstall
* OC kernel to 1704MHz, enable it in performance settings. Default speed is 1608MHz
* Unlock RK3188T frequency to 1608.Not tested
* Included CWM v6.0.5.1, you can use stock remote on CWM
* Mapped right mouse button to back
* Ethernet Settings to Settings menu
* ......







Frequently Asked Questions:

Q) Where are Developer options and Performance settings?
A) Go to Settings > About phone, and press five times on Build number.
abdul_pt
 
Posts: 3
Joined: Sun Jul 12, 2015 6:08 pm

Re: [ROM] CyanogenMod 11 MK902

Postby abdul_pt » Tue Jul 14, 2015 11:29 am

RECOVERYS



--> TWRP 2.8.7.0 - http://www.freak-tab.de/abdul_pt/nitro/TWRP_2.8.7.0.img

--> CWM 6.0.5.1 - http://www.freak-tab.de/abdul_pt/nitro/CWM_6.0.5.1.img



-> parameter file - http://www.freak-tab.de/abdul_pt/nitro/parameter

INSTALLATION

Download the recovery of your liking and the parameter file
Place the MK902 in bootloader mode
Open RK flash tool to flash single image and select only the parameter and recovery file
DO NOT ERASE IDB
Press run/start
Enjoy
abdul_pt
 
Posts: 3
Joined: Sun Jul 12, 2015 6:08 pm


Return to Rikomagic MK902 Android PC Forum

Who is online

Users browsing this forum: No registered users and 2 guests