new releases with a few holes

Forum to discuss the Rikomagic MK802 Mini PC

Moderators: KEgg, twjordo, tatubias

new releases with a few holes

Postby Drift » Thu Jun 28, 2012 6:10 am

One question. I red that there are new releases with a few holes due to avoid overheating. How can I know if the MK802 has those holes before buying it?
Drift
 
Posts: 14
Joined: Fri Jun 08, 2012 7:18 am

Re: new releases with a few holes

Postby NeoStormer » Thu Jun 28, 2012 3:16 pm

Looking at this at a mechanical engineering standpoint, I can tell you these holes do nothing but let dirt and dust into the system, the holes are located on the bottom and since heat rises they do nothing.

In other words, I wouldn't worry about it.
Visit my Website: NeoStormer Robotics

Currently working on my Master's Degree in Mechanical Engineering with Specialty in Mechatronics.
NeoStormer
 
Posts: 26
Joined: Tue Jun 26, 2012 4:37 pm
Location: New Mexico Tech, Socorro, New Mexico, USA

Re: new releases with a few holes

Postby EnvyThisStuff » Thu Jun 28, 2012 4:43 pm

Minus asking the reseller, you can't.

But as with NeoStormer, although the holes do seem to be on the hottest end of the thingie, I can't imagine they're truly for "exhaust" either. There are other units eventually going to come out that will address the "mechanical engineering" aspect more directly, but, those will probably have their own issues and unclarity about exactly what's trying to be accomplished.
Run into a problem? Need ***Mini PC/MK802 services***?
(installing firmware, installing LINUX, getting/setting up SD cards, etc)
Contact us! http://www.EnvyThisStuff.com
EnvyThisStuff
 
Posts: 279
Joined: Tue Jun 26, 2012 12:57 am
Location: New York City

Re: new releases with a few holes

Postby Drift » Fri Jun 29, 2012 6:06 am

Thanks for your answers.
Drift
 
Posts: 14
Joined: Fri Jun 08, 2012 7:18 am


Return to Rikomagic MK802 Forum

Who is online

Users browsing this forum: No registered users and 4 guests

cron