MK802 REV.2 Firmware

Forum to discuss the Rikomagic MK802 Mini PC

Moderators: KEgg, twjordo, tatubias

Re: REV.2 Firmware

Postby EnvyThisStuff » Mon Jul 09, 2012 10:39 pm

Where is the source you're looking at?
Run into a problem? Need ***Mini PC/MK802 services***?
(installing firmware, installing LINUX, getting/setting up SD cards, etc)
Contact us! http://www.EnvyThisStuff.com
EnvyThisStuff
 
Posts: 279
Joined: Tue Jun 26, 2012 12:57 am
Location: New York City

Re: REV.2 Firmware

Postby chesterx » Tue Jul 10, 2012 1:03 am

I believe it was /system/etc/dev/bluetooth
chesterx
 
Posts: 90
Joined: Thu Jun 21, 2012 10:51 pm

Re: REV.2 Firmware

Postby twjordo » Thu Jul 12, 2012 2:12 am

EnvyThisStuff wrote:Other things of note I've discussed with them:
1) They agree the 1.5GHz denotation is wrong.
2) They say nothing was ever overclocked.


my 1gb mk802 is running at 1508mhz = 1.5ghz ....yours is different ??? i used antutu benchmark to clock mine...what are you using to clock yours so that i may test with same program and be sure antutu is not joshing me...(not likely but i would like for us to use the same app)
mk802IV w/ mk702IIair mouse ~ mk802+ 1gb ram 4 gb storage ~ mk802II 1gb ram 4gb storage ~ mk802IIIs 1gb ram 8gb storage with 4port usb running wireless mouse/kboard and red samurai bt gaming controller ~ mk808b 1gb ram 8gb storage
check out TechKnow
twjordo
 
Posts: 406
Joined: Fri Jul 06, 2012 6:07 am
Location: tennessee usa

Re: REV.2 Firmware

Postby kudlinux » Thu Jul 12, 2012 10:25 am

please could someone help to install this in 512 device. Anyone who has extracted this firmware as image?
kudlinux
 
Posts: 42
Joined: Sun Jul 08, 2012 6:46 am

Re: REV.2 Firmware

Postby EnvyThisStuff » Fri Jul 13, 2012 12:07 pm

twjordo wrote:
EnvyThisStuff wrote:Other things of note I've discussed with them:
1) They agree the 1.5GHz denotation is wrong.
2) They say nothing was ever overclocked.


my 1gb mk802 is running at 1508mhz = 1.5ghz ....yours is different ??? i used antutu benchmark to clock mine...what are you using to clock yours so that i may test with same program and be sure antutu is not joshing me...(not likely but i would like for us to use the same app)


I haven't needed to benchmark it yet so I don't know if mine is physically different. All I know is that I've discussed this with the manufacturer numerous times and they claim no, even going so far as saying they would not do it because it is unsafe. That said, there were rumors that the "first generation" was overclocked and that is was backed off of for the "second generation" so it could be you have a first generation (we sold all those and so should only have second generations now so I can't check).
Last edited by EnvyThisStuff on Fri Jul 13, 2012 1:02 pm, edited 1 time in total.
Run into a problem? Need ***Mini PC/MK802 services***?
(installing firmware, installing LINUX, getting/setting up SD cards, etc)
Contact us! http://www.EnvyThisStuff.com
EnvyThisStuff
 
Posts: 279
Joined: Tue Jun 26, 2012 12:57 am
Location: New York City

Re: REV.2 Firmware

Postby EnvyThisStuff » Fri Jul 13, 2012 12:09 pm

kudlinux wrote:please could someone help to install this in 512 device. Anyone who has extracted this firmware as image?


Not 100% sure where you question lies, however, have a look at http://www.envythisstuff.com/techtalk/m ... tefirmware and say which step is causing a problem, if that's what you're referring to. If it's not what you're referring to, please elaborate, thanks.
Run into a problem? Need ***Mini PC/MK802 services***?
(installing firmware, installing LINUX, getting/setting up SD cards, etc)
Contact us! http://www.EnvyThisStuff.com
EnvyThisStuff
 
Posts: 279
Joined: Tue Jun 26, 2012 12:57 am
Location: New York City

Re: REV.2 Firmware

Postby EnvyThisStuff » Fri Jul 13, 2012 12:12 pm

twjordo wrote:
EnvyThisStuff wrote:Other things of note I've discussed with them:
1) They agree the 1.5GHz denotation is wrong.
2) They say nothing was ever overclocked.


my 1gb mk802 is running at 1508mhz = 1.5ghz ....yours is different ??? i used antutu benchmark to clock mine...what are you using to clock yours so that i may test with same program and be sure antutu is not joshing me...(not likely but i would like for us to use the same app)


BTW, do note that the benchmark may not be faulty per se if they are adding up the parallel processing between the CPU and GPU, which is apparently what I think that the manufacturer originally tried to do (they claimed it was a misprint, but I doubt it).
Run into a problem? Need ***Mini PC/MK802 services***?
(installing firmware, installing LINUX, getting/setting up SD cards, etc)
Contact us! http://www.EnvyThisStuff.com
EnvyThisStuff
 
Posts: 279
Joined: Tue Jun 26, 2012 12:57 am
Location: New York City

Re: REV.2 Firmware

Postby twjordo » Fri Jul 13, 2012 12:51 pm

thanks envy !!! that does make sense now i think of it.... i am looking deeper into this issue and i have tweaked mine to "on-demand" so it instantly max's speed (912mhz) when needed... seems to work well and the tweak to do this is included in the tweaks i have posted... enjoy !!!
Last edited by twjordo on Sun Jul 15, 2012 12:09 am, edited 1 time in total.
mk802IV w/ mk702IIair mouse ~ mk802+ 1gb ram 4 gb storage ~ mk802II 1gb ram 4gb storage ~ mk802IIIs 1gb ram 8gb storage with 4port usb running wireless mouse/kboard and red samurai bt gaming controller ~ mk808b 1gb ram 8gb storage
check out TechKnow
twjordo
 
Posts: 406
Joined: Fri Jul 06, 2012 6:07 am
Location: tennessee usa

Re: REV.2 Firmware

Postby kudlinux » Sat Jul 14, 2012 3:47 pm

EnvyThisStuff wrote:
kudlinux wrote:please could someone help to install this in 512 device. Anyone who has extracted this firmware as image?


Not 100% sure where you question lies, however, have a look at http://www.envythisstuff.com/techtalk/m ... tefirmware and say which step is causing a problem, if that's what you're referring to. If it's not what you're referring to, please elaborate, thanks.


envy, thanks dude. your link helps me to solve my problem with flashing
kudlinux
 
Posts: 42
Joined: Sun Jul 08, 2012 6:46 am

Is it new Firmware ???

Postby eCCoMaNiA » Tue Jul 17, 2012 9:01 pm

hello, I was looking original ricomagic web site and there is a dropbox link for firmware file which named FW 0710B.rar
and its date shows yesterday and I thought maybe it's new firmware ? is there any news about rev2 fw ?
link:
https://www.dropbox.com/sh/1m1y99al6a5x5kp/utLPFlueE4
eCCoMaNiA
 
Posts: 23
Joined: Tue Jul 17, 2012 8:57 pm

PreviousNext

Return to Rikomagic MK802 Forum

Who is online

Users browsing this forum: No registered users and 7 guests