How to recovery to factory setting or reinstall system

Forum to discuss the new MK802 V5 LE RK3288 Quad Core A17 Linux Mini PC.

Moderators: KEgg, twjordo, tatubias

How to recovery to factory setting or reinstall system

Postby xsser » Sun Jan 11, 2015 2:00 am

Hi Andy

I install some softwares and setup them.

Now my MK802V5 LE system was can't boot.

How to recovery to factory setting or reinstall system.

I did't find the recovery CD in packaging

Thanks for help
xsser
 
Posts: 1
Joined: Sat Jan 10, 2015 4:10 pm

Re: How to recovery to factory setting or reinstall system

Postby cfrankertjr » Thu Jan 29, 2015 3:58 pm

I would agree with xsser. The recovery image for the 802 V5 LE is missing from all support pages. I was sitting with a device that would not make it past the boot screen (the penguins in the upper left corner of the screen). I've since flashed it with an 802 V5 image for Android, but Android does not provide the features I need.

I will say that prior to that last attempted configuration change, I was quite pleased with the device. It runs very cool, which is surprising with its quick response.


Any help from anyone here would be appreciated.
cfrankertjr
 
Posts: 2
Joined: Thu Jan 29, 2015 3:48 pm

Re: How to recovery to factory setting or reinstall system

Postby cfrankertjr » Tue Feb 03, 2015 4:31 am

After emailing Andrew, I discovered that the 802 V5 LE and the 902 II LE use the same recover software and firmware.

I'll try to remember to post the link he sent me on here tomorrow.
cfrankertjr
 
Posts: 2
Joined: Thu Jan 29, 2015 3:48 pm

Re: How to recovery to factory setting or reinstall system

Postby giupmat » Tue Feb 10, 2015 11:11 am

Try this.
giupmat
 
Posts: 30
Joined: Wed Dec 03, 2014 10:56 am


Return to Rikomagic / Cloudsto MK802 V5 RK3288 Quad Core A17 Linux Mini PC

Who is online

Users browsing this forum: No registered users and 1 guest