Firmware update 29.09

Forum to discuss the Rikomagic MK802 II Mini PC

Moderators: KEgg, twjordo, tatubias

Re: Firmware update 29.09

Postby igme » Thu Oct 11, 2012 5:21 am

I am still waiting for my MK802 ii to arrive, and reading all these issues is a little discouraging.

I read about the power issues (since i will be plugging a k700 keyboard and an external hd) and the heat problems so I actually ordered a 5v 2a plug-in adapter and small aluminium heat sinks just to be on the safe side (they will arrive later than the mk802 ii). Last night, I've read about the phoenixcard not working with some built-in card reader, so i guess I will have to get a usb one if it turns out as such for me.

So at the moment, the 120822 is the more stable firmware - it would probably be a good idea to start a sticky stating which firmware is the most stable at the moment (to help new owners).

It would be great if they would focus on making the firmware stable first before focusing on mk802 iii .....
igme
 
Posts: 8
Joined: Tue Oct 09, 2012 5:06 pm

Re: Firmware update 29.09

Postby homman » Thu Oct 11, 2012 7:17 am

Who have link to the old firmware.

This new running slow and freezes on startup.

And I did not do backup before flashing.

Help
homman
 
Posts: 65
Joined: Thu Oct 11, 2012 7:14 am

Re: Firmware update 29.09

Postby ddlg2007 » Thu Oct 11, 2012 10:38 am

Hi, I am new. I try flash this version but can not do nithing. I fillow this:

Tools Needed ----ok
1. Phoenix Card ----ok
2. Minimum 2gb SD-Card ----ok
3. SD-Card Writer ----ok
4. WIndows OS ----ok
5. Image File ----ok

Steps -

1. Plugin your SD-Card Writer with SD-Card ----ok
2. Run PhoenixCard.exe ----ok
3. Select Disk Drive ----ok
4. Select Image File ----ok
5. Select Write Mode - Product ----ok
6. Burn ----NO NO NO NO
7. After Image is written to SD Card, pull out and insert SD Card into MK802II
8. Power on MK802II, wait for 4-5 minutes, power indicator (blue light) will automatically turn off
9. Remove SD Card and power MK802II again.
10. Voila. Image flashed. Enjoy.

So in step 6 the PhoenixCard dont give me option to burn. What can I do?
ddlg2007
 
Posts: 8
Joined: Wed Oct 10, 2012 3:09 pm

Re: Firmware update 29.09

Postby Bailiff » Thu Oct 11, 2012 10:58 am

I just send a mail to their support with this problem and received answer as below
Hi,:

I have reported this issues to our engineer, they will test it first.

Thanks for your inf.


So I hope we will get new firmware or solution ASAP

The changelog is short:
1. Support USB mircophone.
2. Support DLNA.
Bailiff
 
Posts: 15
Joined: Mon Aug 13, 2012 11:25 pm

Re: Firmware update 29.09

Postby stevhorn » Thu Oct 11, 2012 3:09 pm

ddlg2007 wrote:So in step 6 the PhoenixCard dont give me option to burn. What can I do?


Unplug all usb devices and try again.
stevhorn
 
Posts: 21
Joined: Thu Aug 30, 2012 9:44 am

Re: Firmware update 29.09

Postby jrrsteve » Thu Oct 11, 2012 5:00 pm

Bailiff wrote:I just send a mail to their support with this problem and received answer as below
Hi,:

I have reported this issues to our engineer, they will test it first.

Thanks for your inf.


So I hope we will get new firmware or solution ASAP

The changelog is short:
1. Support USB mircophone.
2. Support DLNA.


Thanks for info Bailiff. I too sent an email to support on the issue, no response however. I have re-flashed to the 0822 version and am using VLC Beta for video. No problems with sync at all now so I think I will stick with this version for the meantime.
jrrsteve
 
Posts: 12
Joined: Tue Oct 09, 2012 6:14 pm

Re: Firmware update 29.09

Postby jeromeof » Thu Oct 11, 2012 9:37 pm

Same problem for me. I even shutdown correctly.

To be honest, this is shockingly bad quality control. Did no one in Rikomagic actually test this firmware before uploading it?

Very annoyed as I spend a few hours configuring the layout the way I wanted and now I am back to the older firmware.
jeromeof
 
Posts: 11
Joined: Tue Aug 14, 2012 9:32 am

Re: Firmware update 29.09

Postby loadedlen » Fri Oct 12, 2012 3:51 am

I think it must have something to do with the SD card. I reflashed this image - took out my 4gb SD card that the 29.09 image was on and left the slot open...then setup google play, updated gmail, went through all the settings for display, language, timezone, etc... disabled android keybard, removed korean keyboard and pinyin, installed dropbox, rebooted multiple times...everything was fine. Popped in my 8gb SD card (blank, by the way) and it stalled on the boot animation. removing the card did not resolve the issue. square one.
loadedlen
 
Posts: 9
Joined: Sun Oct 07, 2012 4:46 pm

Re: Firmware update 29.09

Postby joepe » Fri Oct 12, 2012 5:05 am

Has anyone tested skype on the new version? Does the issue with green/pink video on the receiver end still exist?
Last edited by joepe on Fri Oct 12, 2012 3:48 pm, edited 1 time in total.
joepe
 
Posts: 2
Joined: Thu Oct 11, 2012 3:08 pm

Re: Firmware update 29.09

Postby ddlg2007 » Fri Oct 12, 2012 10:27 am

When I buy Rikomagic II I was very happy but now that I see its use and support so bad that I'm getting (not counting the amount of problems I read) I feel very sad for my investment.
ddlg2007
 
Posts: 8
Joined: Wed Oct 10, 2012 3:09 pm

PreviousNext

Return to Rikomagic MK802 II Forum

Who is online

Users browsing this forum: No registered users and 4 guests