Page 8 of 10

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Mon Dec 24, 2012 3:26 am
by torrd25
Hi,

For those using USB port from your TV, at times you will have rebooting issues.
Highly recomended to use power adapter that really provides 2A or 2000mA.

Some older (4 years old ) TV has USB but they are only for good enough to power up thumbdrive.
It is safe to say, if your TV USB port is capable to work well on HDD it is likely to power your MK802 III well.

The issue is current not voltage of the USB.
Standard USB only provides 500mA. Hope this clear up a lot of confusion.

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Mon Dec 24, 2012 7:11 am
by gabbian0
My TV USB port is a "service only", it's capable to run my MK802 III with an HDD attached. I watched a full 1080p movie without interruptions.
However, if i attach an hub it's not working anymore.
I have an USB power adapted declaring "5V 2000ma" on the label, but it's not even able to boot my MK802 without any device attached.
It's really annoying that rikomagic didn't provide a PROPER usb power adapter.

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Tue Dec 25, 2012 7:47 pm
by bdidol
If you can, DO NOT USE POWER ADAPTER THROUGH USB HUB. Use anything, any model directly from the outlet to your MK802III. You should be fine.

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Wed Dec 26, 2012 3:06 pm
by matg
installed this update and now its bricked!

How do I unbrick?

edit: now fixed.

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Wed Dec 26, 2012 3:47 pm
by 500ef
Take a look at this topic:

viewtopic.php?f=9&t=3655

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Sat Dec 29, 2012 10:55 am
by goldanko
This fw works

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Sun Dec 30, 2012 10:10 am
by yaniv3993
hi

i look for the international rikomagic web and didn't find it, were can i find the most update firmware for the MK802iii?

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Fri Jan 04, 2013 12:54 pm
by danyrolux
New firware released on ftp Rikomagic MK802III.rar 217275 KB 04.01.2013 14:42:00
ftp://FTP_user:user123@184.82.248.245

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Fri Jan 04, 2013 5:21 pm
by 500ef
danyrolux wrote:New firware released on ftp Rikomagic MK802III.rar 217275 KB 04.01.2013 14:42:00
ftp://FTP_user:user123@184.82.248.245


Do you have the changelog?

PS: Maybe it's better open a new topic for it... ;)

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Sun Jan 06, 2013 8:03 pm
by gregland
Someone try it? ;-)