Page 9 of 10

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Tue Jan 08, 2013 7:39 am
by valininja
i downloaded it, but i'm too much of a n00b in this to try it. still waiting for a more experienced user to try it and share the results.

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Tue Jan 08, 2013 7:20 pm
by dsdsdk
danyrolux wrote:New firware released on ftp Rikomagic MK802III.rar 217275 KB 04.01.2013 14:42:00
ftp://FTP_user:user123@184.82.248.245


Metafile is updated:
post-build=rk30sdk/rk30sdk/rk30sdk:4.1.1/JRO03H/eng.ant.20121221.174939:eng/test-keys
post-timestamp=1356083422
pre-device=rk30sdk

Device updated fine.

Kernel Version 3.0.8+ (what is yours?)
Wifi: Speed Test: 2.3/8.9 (rated 30/30).
Device still seems to kill my router randomly (Airport Extreme).
Seems rooted ("Quick boot" app works).
No other noticible changes.

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Wed Jan 09, 2013 5:40 pm
by guluka
Hi there,

Can someone help me?
Where is the reset button? MK802III
I am waiting for response.

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Wed Jan 09, 2013 7:25 pm
by agasim
Installed it, no major change seen, still 500m for app, any way to change it or need an ad hoc firmware?
@guluka no reset button that i know just unplug and plug power

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Wed Jan 09, 2013 8:35 pm
by agasim
valininja wrote:i downloaded it, but i'm too much of a n00b in this to try it. still waiting for a more experienced user to try it and share the results.

It worked for me

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Fri Jan 11, 2013 2:15 pm
by strumpan

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Sat Jan 19, 2013 7:32 pm
by guluka
Hi there,
Why writes the flash tool the following?

By the "reboot to flash mode":
"device cannot do flash mode because it is not msc device"

And at "nand erase" writes:
"download boot fail"
Shall I tick something by the nfs or ram tab?

The batch tool has an error too:
By the upgrade and restore write that download boot failed

So here I am. Trash? Or is there any solution? My eyes are hurting from the translations and from the wathching millions of pages. Can you help me please? The device is MK802III. I know it's not matching to this topic, but I'm really desperate yet....

Thank You!

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Sun Jan 20, 2013 12:05 pm
by zlacker73
prerunr wrote:Works and is rooted.

i can´t get dts signal to the reciver,same file works on boxeebox is this normal?

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Sun Jan 20, 2013 8:35 pm
by guluka
Hi there,
Why writes the flash tool the following?

By the "reboot to flash mode":
"device cannot do flash mode because it is not msc device"

And at "nand erase" writes:
"download boot fail"
Shall I tick something by the nfs or ram tab?

The batch tool has an error too:
By the upgrade and restore write that download boot failed

So here I am. Trash? Or is there any solution? My eyes are hurting from the translations and from the wathching millions of pages. Can you help me please? The device is MK802III. I know it's not matching to this topic, but I'm really desperate yet....

Thank You!

Re: Rikomagic MK802 III New firmwware20121129

PostPosted: Mon Jan 21, 2013 12:09 pm
by 500ef
zlacker73 wrote:
prerunr wrote:Works and is rooted.

i can´t get dts signal to the reciver,same file works on boxeebox is this normal?


I think it's an android limitation to not allow DTS passthrought. It decodes audio to stereo.

Good for TVs. Not much to receivers.

Yet...