Page 1 of 5

MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Tue Jun 18, 2013 11:26 am
by kcteh
The new firmware available for download from rikomagic official website!

Re: MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Wed Jun 19, 2013 12:40 pm
by 500ef
Do you have more information about it?

Re: MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Wed Jun 19, 2013 12:49 pm
by kcteh
It runs smoothly after upgrading but took longer boot time. u should try it 4.2.2. but it shown. ram size is increase to 1.5gb now.

Re: MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Wed Jun 19, 2013 6:17 pm
by agasim
It works fine for me. Just first feedback, not so meni test done.
Main isues in previous release now fixed
Remote control ok
Keyboard ok
Remote desktop, vnc server, ok
Usb - ethernet ok

Re: MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Wed Jun 19, 2013 9:13 pm
by rafkacz
Hi,

how to upgrade to this version?
Previous updates was only update.zip file which should be copied to sd card and it was automatically recognized at boot time.
But now i don't know what to do with update package...

[UPDATE]
I've succesfully updated to this version... (after some problem with installing win7 drivers).
Remote controll works ok, almost everything works ok....but :-)
But I noticed some problems with network (wifi) - some plugins for XBMC couldn't connect with server (in previous version there was no problem with it).
UPNP sharing in XBMC didnt' work to ...so i've moved back to 20121221 firmware version.

Does anyone have testet XBMC with this firmware version?

Re: MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Thu Jun 20, 2013 12:23 am
by marquesr
I'm having a problem with MK802III. I've downloaded the lastest version from the official website 2013/18/06; but windows 8 won't recognize my minipc, as a consequence i cannot upgrade it. How can I install MK802III drivers so windows could recognise the mini android?
I've done these steps:
1. connect both energy and data cable in pc;
2. right before connect, keep a clip connected in mk802III just like if you were going to make a reset on it.

Right after i connect to pc, windows 8 doesn't recognise my android. It's just like i have not connected anything at all; the setup window does not come up. What can I do?
Thanks for all the help,

Re: MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Thu Jun 20, 2013 4:14 am
by muziling
android 4.2, wow,

Re: MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Fri Jun 21, 2013 9:33 am
by rafkacz
Hi, I've made some additional test - and now everything looks to work fine.
Boot takes a little longer but after that device works smoothly.
Wifi works ok, remote control in new version works fine, and most important - we have 1,5GB storage for installing APPS :-)
Even XBMC works good enought - 720p H264 video works fine, 1080p almost to :-)
It is possible to share contnent over upnp using XBMC - so when we connect HDD to device we have nice DLNA server.
The version of XBMC i use is xbmc-20130219-32e99c7-android-hwaccel-armeabi-v7a and in my opinion is the best now for this device.

regards.

Re: MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Fri Jun 21, 2013 3:06 pm
by osmorgan
can someone provide a link to this version? i can only see one version on the Rikomagic website (Rikomagic MK802III Recovery Software (20121129))

Thanks

Re: MK802III new firmware jelly bean 4.2 18062013 available!

PostPosted: Fri Jun 21, 2013 3:48 pm
by reidy123
Can some kind person give me a walk through guide on how to install this,i have tried a couple of times with no success. Thanks