MK802 Firmware

Forum to discuss the Rikomagic MK802 Mini PC

Moderators: KEgg, twjordo, tatubias

Re: Firmware

Postby chateau » Tue Sep 25, 2012 2:44 pm

Digitalbros wrote:Greetings to all. Sorry for my English. I have a problem with mk802. I tried to upgrade the firmware via livesuit but nothing (I tried both 1.05, 1.07 and also 1.09). I installed livesuit, then I connected by pressing the button on the mk802 when I connect it to the USB port via the microUSB cable (connector usb otg) windows installs the driver (Vid_1f3a_PID_efe8) then after that I have chosen the image of rom hit the pulsed to start upgrade livesuit but I get the error message "NO DEVICE AVAILABLE."


I usually can get mine to work at that point by going to Windows 7 Device Manager and disable the driver (Vid_1f3a_PID_efe8) and then enable the same driver.
chateau
 
Posts: 20
Joined: Wed Aug 22, 2012 2:26 am

Re: Firmware

Postby astrodan » Wed Sep 26, 2012 12:14 pm

Hello,

So when do we get to see the newly developed Windows7 64 bit driver? Or, should I ask, are they located someplace else for download?

I'm also trying the USB driver in Livesuit without success. I point my old USB1.2 speed XP machine to use it, but it does not allow the MK802 to be found. Am I doing something wrong or does this only work if the device is on a USB2.0 port?

Thanks for any help.

Dan
astrodan
 
Posts: 1
Joined: Wed Sep 26, 2012 1:11 am

Re: MK802 Firmware

Postby Digitalbros » Wed Sep 26, 2012 2:38 pm

Hi all. And thanks for the reply, but still nothing I just can not start the upgrade with livesuit 1.09 (but also with other versions). It gives me the following errors:

initialization fails (513) - reactivated when the driver
no device needs upgrade! - This appears when I press the button system upgrade

Someone else with a possible solution to my problem? Thank you.
Digitalbros
 
Posts: 3
Joined: Sun Sep 23, 2012 4:24 pm

Re: MK802 Firmware

Postby Digitalbros » Wed Sep 26, 2012 2:41 pm

Hi all. And thanks for the reply, but still nothing I just can not start the upgrade with livesuit 1.09 (but also with other versions). It gives me the following errors:

initialization fails (513) - reactivated when the driver
no device needs upgrade! - This appears when I press the button system upgrade

mk802 is the version with 1GB of RAM

Someone else with a possible solution to my problem? Thank you.
Digitalbros
 
Posts: 3
Joined: Sun Sep 23, 2012 4:24 pm

Re: MK802 Firmware

Postby random1st » Sun Oct 07, 2012 11:07 am

Seeking firmware on 2012 08 14 for MK802 + with built-in microphone. Help, please
random1st
 
Posts: 2
Joined: Sun Oct 07, 2012 7:50 am

Re: MK802 Firmware

Postby mytho » Mon Oct 08, 2012 6:58 pm

Hi.
I've got one question. Is it possible to install firmware from mk802 II to mk802 by livesiute or phoenixcard? The specs looks similar so maybe it's doable. The second generation got firmware from 29.09 so the might be some changes.
mytho
 
Posts: 2
Joined: Mon Oct 08, 2012 6:53 pm

Re: MK802 Firmware

Postby mytho » Tue Oct 09, 2012 5:17 am

Sorry for two posts one after another but i found the link your looking for
The firmware download link :

http://kuai.xunlei.com/d/SIZDKYWCSPQA

click Image, then you can download

test8-15a.img is firmware for MK802+
mytho
 
Posts: 2
Joined: Mon Oct 08, 2012 6:53 pm

Re: MK802 Firmware

Postby xman.android » Thu Oct 18, 2012 3:17 pm

hi everybody

i have a weired problem with my newly bought MK802+ (1GB) i just received it on tuesday and tested it succesfully but after 1 hours there were no video signal on the TV even if the LED is still light, i have tried it with three diffeent monitors/TV without luck, na di have decied to flash it but there were another problem !; when i connect the device to the pc usb port (while the reset buton is presssed) it show an unknown device don't find the right driver (till now it's normal) and when go to device manager and try to install the usb driver manually it feel to deted the driver (when show the system where to find the driver in the usbdriver folder) then i have tried brute force method by selecting the a generic list of device then cjhoose the supplied disk and select the usdbdriver folder it install the driver without any yellow triangle (seems to be good but wait..) when i come back the livesuit (already run and select the .img file) it freeze (livesuit) and only unfreez when unplug the mk802+ and show initial fails (515)

yesterday i have wrote an email to the buyer (via Ebay) and they adviced to change the power adapter as they nthink that power supply may not be sufficient and i tried without success

anyonce can help ?
xman.android
 
Posts: 5
Joined: Wed Oct 17, 2012 2:47 pm

Re: MK802 Firmware

Postby Tursse » Thu Nov 29, 2012 7:40 pm

I have also an unknown device under devices. Properties say it is Device USB\VID_140E&PID_B086\6&12b20589&0&3.

Is this not MK802? The device looks totally like it, the only difference being having a reset button instead pf a reset hole (near the Android dude's feet).
Tursse
 
Posts: 1
Joined: Thu Nov 29, 2012 7:30 pm

Re: Firmware

Postby ewngpro » Wed Jan 09, 2013 1:00 pm

earedien wrote:I ran the LiveSuit program, but it is telling me "Not found device !". After that, the MK802 is stuck on the Android boot screen and will not load at all.


I have same problem, were you able to resolve this?

Thanks in advance
ewngpro
 
Posts: 2
Joined: Fri Jan 04, 2013 6:21 pm

PreviousNext

Return to Rikomagic MK802 Forum

Who is online

Users browsing this forum: Google [Bot] and 1 guest