MK802 II Supported Webcams

Forum to discuss the Rikomagic MK802 II Mini PC

Moderators: KEgg, twjordo, tatubias

Re: MK802 II Supported Webcams

Postby homman » Sun Oct 21, 2012 5:29 pm

I got a response from the cheongtathk :(

"Sorry, our goods can not be sold to the foreign and sent thank you"
homman
 
Posts: 65
Joined: Thu Oct 11, 2012 7:14 am

Re: MK802 II Supported Webcams

Postby rodrigolopezguerra » Mon Oct 22, 2012 8:53 pm

Someone gets skype working on the new FW ? Sound at least ? At the moment i log in , the Audio output change to AUDIO_CODEC , and i have to put it back manually to AUDIO_HDMI.

Someone else experiencing this issue ?

Thx!
Regards
rodrigolopezguerra
 
Posts: 39
Joined: Sun Oct 14, 2012 4:02 pm

Re: MK802 II Supported Webcams

Postby homman » Tue Oct 23, 2012 12:19 pm

Where do you see this change the audio?

You mean the main audio output setting for the mk802?

http://www.squidoo.com/mk802-skype-usb-webcam
here you can see 9000 that never worked.

So I do not know what kind of stopped working after update
I see its never worked.
homman
 
Posts: 65
Joined: Thu Oct 11, 2012 7:14 am

Re: MK802 II Supported Webcams

Postby rodrigolopezguerra » Tue Oct 23, 2012 1:38 pm

homman wrote:Where do you see this change the audio?

You mean the main audio output setting for the mk802?

http://www.squidoo.com/mk802-skype-usb-webcam
here you can see 9000 that never worked.

So I do not know what kind of stopped working after update
I see its never worked.


In settings -> Sound -> audio output (or similar) , you have 3 options
a)AUDIO_CODEC
b)AUDIO_HDMI
c)AUDIO_SDFI

Since the mk802II is connected to HDMI on the TV , the correct output sound is AUDIO_HDMI, and the sounds work like a charm all the time.
But the moment i log in on skype , or i make a call , the output change by itself to AUDIO_CODEC , and i have no sound.
If i change it back in the middle of the call , i'm able to hear again (until i make a new call).

This problem is not present in the rescue FW , but also exists in 29.09

the problem with the Rescue FW is that there's no support for MIC.
(I think that the supported added for capture in card0 is the source of this issue)

Also i remarked in dmesg that this is happening each time i lost sound with skype:

[HDMI-AUDIO] PCM trigger start...
[HDMI-AUDIO] PCM trigger stop...

And , don't know why but seems to be a sleep of the wifi that goes away just after :
rtw_android_priv_cmd: Android private cmd "SETSUSPENDOPT 0" on wlan0
cfg80211_rtw_set_power_mgmt
rtw_android_priv_cmd: Android private cmd "SETSUSPENDOPT 1" on wlan0

anyone is familiar with this ? or is facing this issue ? or output sound work just fine for you ?

Thanks,
Regards
rodrigolopezguerra
 
Posts: 39
Joined: Sun Oct 14, 2012 4:02 pm

Re: MK802 II Supported Webcams

Postby SoRRoW » Thu Oct 25, 2012 2:44 pm

The green / pink screen in skype is not a MK802 problem, is compatibility issue between ICS and Skype, a lot of people are waiting for a new version from Skype.
SoRRoW
 
Posts: 2
Joined: Sat Oct 20, 2012 6:17 pm

Re: MK802 II Supported Webcams

Postby homman » Fri Oct 26, 2012 1:38 pm

I did update firmware and bought a VX-700

After the firmware update does not work OTC socket.
On OTC don't work RC11 keyboard, lan adapter, USB pendrive.

When I turn off the wifi device is turned off. Why?

Positive:
Pendrive works on a passive hub. Previously only worked directly on the device. Works well with hard drive, BT adapter.

------------------------
Titanium Backup did not restore my settings icon on your desktop. Maybe I did something wrong?

---------------------------------------------------------------------------
I bought a vx-700 with a microphone.
I'm in the testing

On the old firmware camera work
Microphone does not work but it probably by my installations / removal ics google voice problem.

After update to 20.10 voice works well on the c510 and VX800.

The camera vx700 does not work c510 also does not work.

When you receive a call is no ringing sound. Only see xxx user calls to you.
But the voice works.

There is a long delay when you click call.
On the receive computer passes 10 seconds.
And on mk802 not dial sound.

I tested on Skype 2.8
homman
 
Posts: 65
Joined: Thu Oct 11, 2012 7:14 am

Re: MK802 II Supported Webcams

Postby homman » Fri Oct 26, 2012 4:11 pm

After three hours I've had enough.

The voice "works" after the firmware update works on any skype.

Unfortunately VX700 is quiet.
You can hear only 1.5 meters

c510 is too loud

If does not say nothing you can hear squeak.
Video does not work.
Sometimes it works sometimes it does not on c510 and skype 2,8
homman
 
Posts: 65
Joined: Thu Oct 11, 2012 7:14 am

Re: MK802 II Supported Webcams

Postby Adainair » Sat Oct 27, 2012 9:23 pm

@Homman

Any update with vx700?
Mine OTG port works.
For backup try "App Backup & Restore" apk.
Adainair
 
Posts: 136
Joined: Fri Oct 05, 2012 5:37 pm

Re: MK802 II Supported Webcams

Postby homman » Sun Oct 28, 2012 1:40 am

I do not understand?
You ask Do I have any new results with vx700? No

My OTG dont works :(

"App Backup & Restore" apk."

In titanium backup memorized my applications and settings. But not memorized
the position of icons on desktop. And this I wanted to get.

Your apk remember position icons?
homman
 
Posts: 65
Joined: Thu Oct 11, 2012 7:14 am

Re: MK802 II Supported Webcams

Postby Adainair » Sun Oct 28, 2012 10:26 am

homman wrote:I do not understand?
You ask Do I have any new results with vx700? No


Yes, does the vx700 works in skype? (video call)

homman wrote:Your apk remember position icons?


No, i don't think so. But is easy. ;)
Adainair
 
Posts: 136
Joined: Fri Oct 05, 2012 5:37 pm

PreviousNext

Return to Rikomagic MK802 II Forum

Who is online

Users browsing this forum: No registered users and 4 guests