Recovery firmware for MK802 III

Forum to discuss the Dual Core Rikomagic MK802 III Mini PC

Moderators: KEgg, twjordo, tatubias

Re: Recovery firmware for MK802 III

Postby armageddon » Sun Jan 06, 2013 4:28 am

Installed MK802III_20121129 firmware hoping it would allow support for native 1080p but it's still 720p :(

In Settings/Screen/HDMI Mode I have 1920x1080p-60 option selected and my TV reports 1080p mode but the image is 720p upscaled to 1080p.
http://www.whatismyscreenresolution.com/ reports that it's 1280x720.

Is it just me? Anybody else struggles to get 1080p?

Thanks
armageddon
 
Posts: 2
Joined: Sun Jan 06, 2013 4:16 am

Re: Recovery firmware for MK802 III

Postby chrisbce » Mon Jan 07, 2013 2:11 am

OK, I'm having major issues. First, the apps were only installing on the internal memory and not the sdcard. Then the device became un-responsive and wouldn't boot up because the internal memory was full. So I decided to do a clean wipe and restore. That really downed the device. Now I have taken the unit apart and I am trying to install the recovery image to the sdcard. My windows XP will not recognize the device using the USB port. I tried flashing the drive using the technique of putting a metal piece in between the 6th and 7th mount of the sdcard and no matter how hard I try I cannot get the USB to recognize the device. Is there an easy way to make sure that the device mount to the USB port so that I can install the recovery image file using LiveSuit. I've been trying for days and I'm at my wits end. I'm wondering if anyone else has had the same issue. Please help!
chrisbce
 
Posts: 5
Joined: Sat Jan 05, 2013 8:22 pm

Re: New firmware for MK802 III

Postby chrisbce » Mon Jan 07, 2013 2:14 am

NickRabit wrote:
blackk wrote:Thanks for install methods, but firmware is 10/31, posted before.
Unfortunately not possible to recover a bricked device (need flash with RK Batch Tool).


Hi, is there some image for RK Batch Tool?? I bricked my MK802 III when i flashed newest firmware :/ Thx



Im having the same exact issue. Any help please!
chrisbce
 
Posts: 5
Joined: Sat Jan 05, 2013 8:22 pm

Re: Recovery firmware for MK802 III

Postby guluka » Sun Jan 20, 2013 8:34 pm

Hi there,
Why writes the flash tool the following?

By the "reboot to flash mode":
"device cannot do flash mode because it is not msc device"

And at "nand erase" writes:
"download boot fail"
Shall I tick something by the nfs or ram tab?

The batch tool has an error too:
By the upgrade and restore write that download boot failed

So here I am. Trash? Or is there any solution? My eyes are hurting from the translations and from the wathching millions of pages. Can you help me please? The device is MK802III. I know it's not matching to this topic, but I'm really desperate yet....

Thank You!
guluka
 
Posts: 11
Joined: Fri Jan 04, 2013 5:20 pm

Re: Recovery firmware for MK802 III

Postby Dmitry » Sun Feb 03, 2013 1:51 pm

Hello Failed to download my device, I tried to flash it as advised on the forum. But during the firmware is an error "Download IDB Failed" (screenshot attached) and on the TV screen now there is nothing, only the power light is lit. The computer sees the device, I used a different firmware and different data cable. What can be done?
Attachments
error.jpg
Screenshot of the error
error.jpg (64.18 KiB) Viewed 6162 times
Dmitry
 
Posts: 2
Joined: Sun Feb 03, 2013 1:15 pm

Re: Recovery firmware for MK802 III

Postby rclements » Mon Feb 04, 2013 12:24 pm

viewtopic.php?f=9&t=3693

this might help :-)
rclements
 
Posts: 5
Joined: Wed Nov 28, 2012 10:25 am

Re: Recovery firmware for MK802 III

Postby Dmitry » Tue Feb 05, 2013 11:40 am

rclements wrote:http://www.rikomagic.co.uk/forum/viewtopic.php?f=9&t=3693

this might help :-)

have used this method, but the firmware is not possible. What does the error "Download IDB Fail"?
Dmitry
 
Posts: 2
Joined: Sun Feb 03, 2013 1:15 pm

Re: Recovery firmware for MK802 III

Postby rclements » Tue Feb 12, 2013 6:39 pm

I Used these Files :

http://www.sendspace.com/pro/dl/2c4c5y

got the link from w2comp.com ... worked for me ! :D
rclements
 
Posts: 5
Joined: Wed Nov 28, 2012 10:25 am

Re: Recovery firmware for MK802 III

Postby mk802iii » Sun Feb 17, 2013 7:26 am

armageddon wrote:Installed MK802III_20121129 firmware hoping it would allow support for native 1080p but it's still 720p :(

In Settings/Screen/HDMI Mode I have 1920x1080p-60 option selected and my TV reports 1080p mode but the image is 720p upscaled to 1080p.
http://www.whatismyscreenresolution.com/ reports that it's 1280x720.

Is it just me? Anybody else struggles to get 1080p?

Thanks

It's not just you, I am afraid. I have exactly the same problem, the device, MK802iii won't even switch to either 1920x1080p-60 or 1920x1080p-50. It's strange, because every spec or review I've seen have mentioned 1080p support. Does it work for anyone at all?
mk802iii
 
Posts: 21
Joined: Sun Feb 17, 2013 7:20 am

Re: Recovery firmware for MK802 III

Postby Wenom666 » Sun Jun 23, 2013 12:17 am

Dmitry wrote:Hello Failed to download my device, I tried to flash it as advised on the forum. But during the firmware is an error "Download IDB Failed" (screenshot attached) and on the TV screen now there is nothing, only the power light is lit. The computer sees the device, I used a different firmware and different data cable. What can be done?


I have the same problem, any solution to this problem, please help.
Wenom666
 
Posts: 5
Joined: Sun Jun 23, 2013 12:15 am

PreviousNext

Return to Rikomagic MK802 III Forum

Who is online

Users browsing this forum: No registered users and 0 guests