CWM Recovery Installation + CM9 & CM10 for original Mk802

Forum to discuss the Rikomagic MK802 Mini PC

Moderators: KEgg, twjordo, tatubias

Re: CWM Recovery Installation + CM9

Postby chapp » Mon Nov 26, 2012 5:08 pm

kudlinux wrote: The persisting problem is the device does not save the date. in every reboot date has to changed otherwise while browsing throws SSL certificate errors.


I've got a similar problem with SSL and date. Does anyone know a solution to this issue?
chapp
 
Posts: 1
Joined: Mon Nov 26, 2012 4:51 pm

Re: CWM Recovery Installation + CM9 & CM10 for original Mk80

Postby pel » Sun Dec 09, 2012 12:32 pm

fyi unfortunately i have had it with CM9 it bootlooped one too many times for me! installed 20120724 rom, it is actually much snappier than CM9 the only downside is that it doesnot recognise my (playstation copy) usb controller, though it does support some controllers.

hoping the cm10 port appears soon!
pel
pel
 
Posts: 28
Joined: Thu Aug 02, 2012 2:00 pm

Re: CWM Recovery Installation + CM9 & CM10 for original Mk80

Postby bateau009 » Tue Dec 11, 2012 4:23 am

Hi,
after messing everything up with livesuit I was stuck with a "bricked" MK802II. I was able to flash many firmwares with livesuit but MK802 didn't boot with neither of them. Also the PhoenixCard method didn't work. Eventually I found that CWM is the only thing to boot on the device so I was forced to give a try to CM10.
I finally managed to successfully install CM10 on MK802II via the "extendedcommand method" described here: http://www.rikomagic.co.uk/forum/viewtopic.php?f=2&t=142&start=130#p3967. CM10 seems to work without major glitches, even WIFI and bluetooth are on while video acceleration is a bit flacky with the resolution @1280x670.
I just played with XBMC beta 3 a little bit, athough I didn't try any video playback yet, maybe tomorrow:).

Now here comes the problems:
1. Booting from microsd card doesn't work anymore. I tried without success some linaro images that previously worked. Is there a known way to overcome this issue?
2. Flashing firmwares with either Livesuit or PhoneixCard doesn't work anymore. These two methods let me flash various firmwares but what I get is an unbootable device.
3. CWM method works but I didn't get a clue on how to use this method to install, say, a stock firmware. Is that still possible?

any help?
bateau009
 
Posts: 1
Joined: Tue Dec 11, 2012 3:25 am

Re: CWM Recovery Installation + CM9 & CM10 for original Mk80

Postby t0nito » Tue Dec 11, 2012 1:30 pm

CW9 or CW10 on the mk802 leaves too much to be desired. I can't use a device that is chopping video every second...
t0nito
 
Posts: 17
Joined: Fri Oct 19, 2012 8:28 pm

Re: CWM Recovery Installation + CM9 & CM10 for original Mk80

Postby deanstead2k12 » Sat Dec 15, 2012 8:53 pm

hi all so i have managed to install the recovery no problem and reboots to recovery no problem as soon as i press down arrow to move down screen goes blank for a second or 2 then comes back on to recovery with the same option still selected if i press any direction key it does the same thing, has anyone got any clues??

thanks in advance
deanstead2k12
 
Posts: 1
Joined: Sat Dec 15, 2012 8:49 pm

Re: CWM Recovery Installation + CM9 & CM10 for original Mk80

Postby Haris1977 » Wed Dec 19, 2012 9:06 am

I have some questions about this rom. Does this rom support:

1) wired/wireless usb gamepads?
2) usb 2 ethernet adapter?
3) usb hubs?
4) i am going to buy an AK-212 4GB Android 4.0 Mini PC Wireless Google TV player BOX 1GHz Cortex-A8 HDMI, which is a clone mk802 i suppose. Would i be able to install CM9/CM10 and CWM on it?


Thanks:) :D
Haris1977
 
Posts: 2
Joined: Fri Dec 14, 2012 10:28 am

Re: CWM Recovery Installation + CM9 & CM10 for original Mk80

Postby zutaten » Tue Jan 01, 2013 1:20 pm

yellowboy63 wrote:Finally, after days for searching and reading i found a working cwm for my mk802 that accepts my keyboard and mouse input. The screen still blinks on and off but it installed cm9 no problems. here's the link: http://files.androtab.info/allwinner/cm9/20120615/ Use at your own risk. followed instructions on 1st page for installation. Hope this helps some.


It works.
Finally I can install CM9 and then CM10.
zutaten
 
Posts: 5
Joined: Mon Aug 27, 2012 11:26 am

Re: CWM Recovery Installation + CM9 & CM10 for original Mk80

Postby gordil » Fri Jan 11, 2013 10:53 am

I cannot make any selection from the boot screen of my MK802...when I press a key or move mouse the screen become black for some time and returns back the same menu....What can I do...? Please help me...


Can anyone please post a Cynogen mod 9 ROM which can be installed using MK802 LiveSuit
gordil
 
Posts: 1
Joined: Fri Jan 11, 2013 10:33 am

Re: CWM Recovery Installation + CM9 & CM10 for original Mk80

Postby zutaten » Fri Jan 11, 2013 10:23 pm

gordil wrote:I cannot make any selection from the boot screen of my MK802...when I press a key or move mouse the screen become black for some time and returns back the same menu....What can I do...? Please help me...


It seems that the link from my previous post does not work.
In this link:http://depositfiles.com/files/jstxmiuyk you have a copy of the CWM of my previous post.
With this version I could solve the problem you mention.
zutaten
 
Posts: 5
Joined: Mon Aug 27, 2012 11:26 am

Re: CWM Recovery Installation + CM9 & CM10 for original Mk80

Postby jonnyboy » Mon Jan 14, 2013 4:12 pm

Hey Kegg! I was just wondering if you have experienced the issue of when you enter recovery mode the device boots to a black screen. I let it site for about an hour, but nothing ever happened. Ended up having to do a hard reset. I did follow your instructions exactly.

I do not have an SD Card so i used the internal memory. Do you think that could be the issues? Thanks for the response!

JH
jonnyboy
 
Posts: 2
Joined: Sun Jan 13, 2013 11:19 pm

PreviousNext

Return to Rikomagic MK802 Forum

Who is online

Users browsing this forum: Bing [Bot] and 4 guests